A4-8 Understanding Elements Display

A4-8
Understanding Element Display

Introduction

The main principle in Archicad, as opposed to traditional 2D CAD packages, is the intent that all Architectural Drawings are generated directly from a 3D model. That means Elevations and Sections are by default directly linked to the 3d model and thus all changes made in either the 3D model or a linked Drawing are reflected live. With this approach one does not need to duplicate a 2D Floor Plan Drawing to generate a Reflected Ceiling Plan (RCP), instead one can simply change the display of various Elements and add more information into the 3D model.

To achieve this Archicad allows a high level of control over various aspects of Elements placed in a file, not only over the visibility of Elements but also to change their graphic representation properties as required.

There are various settings in various places, which can be categorised into Element level settings and Global Controls:

Element Level Controls

Display settings for the various Drawing Tools, including:

Story Display

Floor Plan Display

Cut Fill Display

2D and 3D Display

Scale Dependant Detail

In the following section we will discuss how to control your Elements’ settings. We will distinguish between construction elements such (Wall, Column, Beam, Slab and Roof) and Openings (Doors, Windows, Empty Openings).

The respective Element Settings will have similarities. The general approach being that you have to:

1. define a home story,

2. define a relation to stories (e.g. elevation to home story, linking element height to another story),

3. define if the element gets displayed on various stories or not and

4. define how it is displayed.

All these settings can be found in an element’s settings. Select relative element and Command+T.

The tabs of interest are:

1. Geometry and Positioning and

2. Floor Plan and Section

Geometry and Positioning

The biggest difference between construction elements and openings here is that construction elements relate to stories and openings relate to the construction element they are placed in. Therefore you cannot select a home story for a door or window.

The relation of construction elements to stories follows a logical procedure:

Home Story.

An element’s home story should be where its base resides, i.e. a column / wall’s home story would be where its base is even if it spans multiple stories upwards. Likewise a slab resides on the story where you’d put your feet on it. Where it gets more ambiguous is with beams, which by default are drawn as overhead elements.

INFO > By default the element’s home story is set to where it is drawn. If you happen to drag a drawn element in elevation, section or 3D to a different level the home story will not change automatically!

Relation to Stories.

Not only can you set the elevation to the home story with positive or negative value for the dimension, for walls and columns you can also define if its height is linked to another story. If your story heights change, then with this setting walls and columns will automatically update to reflect those changes.

The big benefit of this in combination with Archicad’s Building Material priorities is that it would, for example, be possible to draw one continuous column that goes from ground to roof.

Floor Plan and Section.

Where to find: Element Settings (Double Click the Toolbox icon for selected element or Command+T)>Floor Plan and Section

Use this to: Control how an element is displayed graphically on relevant stories.

1. Show on Stories.

1.1 For Walls and Columns your options are according to the following image:

1.2 Slabs have additional options:

2. Floor Plan Display.

The options available depend on which Tool is currently active, but generally are as per the following image: Image 4

Typically walls are set to Cut Only, in other words walls or columns through which the default cut plane passes. The obvious exceptions are low height walls under 1150 in height, and thus these would use the Outlines Only display setting.

Note you can change the cut plane height in: Document>Floor Plan Cut Plane…

In the Floor Plan and Section tab is where you control how the element displays on relevant stories.

There are a number of display settings for walls, beams and columns in the floor plan view.

Typically walls and columns are set to Home Story Only. An exception can be Walls or Columns which due to their respective height may need to be visible on multiple stories.

INFO > Projected will display the cut plane plus anything below the cut.

Projected with Overhead will display the cut plane as well as anything both below and above the cut.

This can be illustrated quite simply using a raked wall as an example:

3. Show Projection.

In case you do select Projected as the Floor Plan Display option, you can further specify what is projected: Image 1

Note that you can define the overhead line type: Image 2

Special consideration must be given to Objects and Stairs as they have an extended set of options for you to control their behaviour. These additional options can be found in the Parameters tab.

A4-8Understanding Element Display