Enter email to receive results:

1. What is the best method for using the Mark-up Tool?

Don’t use Mark-up Tool, but use 2D lines and text instead.

Add all Mark-ups to Archicad Layer.

Create a Markup Layer and keep all mark-ups at this Layer.

2. How do you model a column/wall with a height that projects across multiple Storeys?

Set the Wall/Column at base Story with height linked to Story above, then open 3D View and stretch the Wall/Column to desired height.

Set the Home Story to the base of an element and choose Floor Plan Display Option to Show on All Relevant Storeys.

Set the Wall/Column at base Story with height linked to Story above, then copy and paste Wall/Column to all related Storeys.

3. What filter do you use to set up Fire Resistance Level (FRL) drawings?

Model View Options, in the panel related to FRL diagrams.

Use Graphic Override filter to change graphic appearance of building elements (FRL diagrams, sketch plans) globally in your drawings.

There is no filter for this view settings. Use Worksheet to draw the coloured fills to cover the walls and then overlay GA draw in the Layout.

4. How do you draw Reflected Ceiling (RCP) plans?

Create a new Worksheet, copy & paste elements from Plan View into the Worksheet, than modify exploded elements to achieve desired look and add annotation.

Use the projection of your 3d model (View) in combination with linked Model View Options to globally override some display options of objects/elements.

Set all elements to Overhead All projection method.

5. Dimensions should be always set to:

Dimension Text Only to avoid Witness Lines to intersect with modelled elements.

Dynamic. Ensure dimensions are associative and do not use static dimensions, otherwise should something be edited, dimensions will not update accordingly.

Static. Dimensions should be always set to Static, it speeds up the modelling process.

6. Which View Settings do you use to override Fill Display for Cut Fills to show Composite walls as solid for Concept design stages?

Do not use Composite Walls at Concept Design stages.

Use Model View Options Override Fill Display panel to set cut fills to solid foreground.

Use Graphic Override filter with All Cut Fills – Solid, No Skin Separators override rule.

7. What will be visible when you set the Structure Display filter to Core Only?

Only elements set to Load-Bearing Structural Function.

Only Lift Cores if set properly.

Only Core Skin of Composite, Complex Profile or Basic Element Structure.

8. What is not practical about setting a View’s settings via ‘Get Current Window’s Settings’?

The filter in View Settings will be recorded as a Custom and you can later forget what settings were current at the time of saving the View.

It is actually very practical as you don’t loose time setting up default View Filters (Settings).

It will record your screen/monitor settings as part of the View settings.

 Loading…